This is a report which you should do as below:
• Explain the working and design of HVAF equipment along with feedstock injection
• Discuss the influence of process parameters on particle characteristics
• Describe coating formation in HVAF spraying
The coating material is Cr3C2-NiCr in HVAF thermal spraying. M3 gun is used. Please consider these in this report.
Structure is as below:
1- Introduction
2- Equipment
3- Process and procedure
4- conclusion
– Introduction
Please start with short history of HVAF (from 1989) in your introduction (read these three lines below, but do not copy text. This is just for help)
ViatcheslavE. Baranovski forms AAM (Activated Arc Metallization, LLC), where he develops the HVAF-ARC spray gun featuring a short combustion chamber with a permeable burner block, capable of sustaining stable air-fuel combustion in a very small volume.
– Equipment
In this part is very important for me to know why we use M3 gun instead for example M2 gun or other.
-Process and procedure
Explain about HVAF process and procedure.
-Conclusion
Please do not use webpage or something like this. Use high credit references. It can be book or article. If you do not have enough sources, it means you should not take this order. Because I do not provide any references for you. All references will be checked. So put page number when you refer.
APA
CLICK HERE TO ORDER A SIMILAR OR ANY OTHER ASSIGNMENT YOU HAVE ASSIGNMENT
The post Explain the working and design of HVAF equipment along with feedstock injection appeared first on Apax Researchers.
