Explain using relevant process requirements/service requirements the need to perform pipe sizing and pump selection: Plant Design Assignment, SIT

5.1.1 Introduction and Design Statement
• Explain using relevant process requirements/service requirements the need to perform pipe sizing and pump selection.
• Describe the design statement of the Pipe sizing and pump selection. A design statement is the statement used to check the outcome of the design. For pipe sizing and pump selection, the minimum design statement could be arranged in this manner:
“ To perform pipe sizing to transfer xxxx m3 /hr of liquid consisting of x (mole) of A and Y% of B ….. from …….. to ……….. and select a pump to deliver it ”

5.1.2 Methodology in Pipe Sizing

a. Basic Design Procedure and theory
The design theory (Bernoulli) and steps (pipe sizing, pressure drop calculation) should be explained briefly in the report. Explanation using algorithm (flow chart) is highly encouraged.

b. General design consideration:
 STATE the main pipe sizing criteria you have selected.
 Provide the Piping and Instrumentation Diagram (P&ID) of the section that you are sizing. P&ID must follow the standard guidelines (refer to the resources provided in Brightspace for P&ID).

Below is a sample of P&ID of a typical centrifugal set-up with feedback flow control loop.

5.1.3 Selection of Materials of Construction
Describe all relevant characteristic of chemicals (chemical/physical properties) involved in the pipe sizing and pump selection. These characteristics will be used in selection of materials of construction.

Materials of Construction (MOC)
 List the criteria used in selecting the MOC.
 State the possible MOC for this work.
 State the MOC selected.
 Provide justification for selected MOC by linking the relevant characteristics/process condition/service requirements with the properties of the selected MOC and criteria used. The use of engineering decision matrix is NOT required.

The post Explain using relevant process requirements/service requirements the need to perform pipe sizing and pump selection: Plant Design Assignment, SIT appeared first on Singapore Assignment Help.