For the nine-bus power system shown in Fig.1, comprising three-generators, three-transformers, six transmission lines, and four-loads, consider the following design requirements. I. Determine the actual values of the resistance, inductance, and capacitance of each transmission line using PSCAD/EMTDC. Then, calculate the per-unit (pu) line parameters (R, X, G, and B), present the results in a table format, and use them to determine the series impedance and shunt admittance of the lines’ Π (pi) models. II. Determine the bus admittance matrix YBUS, calculate the power flow on the buses and transmission lines, and solve the network for the unknown voltage magnitudes and phase angles using PowerWorld.
For the nine-bus power system shown in Fig.1, comprising three-generators, three-transformers, six transmission lines, and four-loads, consider the following design requirements.I. Determine the actual values of the resistance, inductance, and capacitance of each transmissionline using PSCAD/EMTDC. Then, calculate the per-unit (pu) line parameters (R, X, G, and B),present the results in a table format, and … Read more