SOLUTION: CON4152– BIM for Building Works | My Assignment Tutor

HD in Building Studies CON4152– BIM for Building WorksCON4152-EA-Drawing_project-202021 (new) – Page 1 of 4 – Mar-21Building Information Modelling for Building Works (2020/21 –Semester 2)End-of-Module Assessment Assignment – Community Hall (temporary will be used forCOVID-19 Testing and Vaccination facility)Intended Learning Outcomes (ILOs):1) Create parametric 3D models for drawing production and other uses.2) Analyze and organize different views and schedules from a digitized building model forconstruction documentation and quantity surveying.3) Outline the roles of BIM and related applications.Main task:1) Prepare a proposal for a community hall;2) This community building will be used for COVID-19 Testing and Vaccination facility;3) Allocate the total space available within a project to different floors;4) Subdivide each floors into specific rooms to meet the program;5) Create intelligent information-rich models and construction documentation for such building;6) Use of different views and schedule from a building model for drawing production and analysis.Minimum design requirements1) The site area should not exceed 230 m2;2) The plot ratio for development should not exceed 3 (i.e. 3 times the site area);3) The building should have minimum 2 storeys high;4) The maximum height of the building should not exceed 15 m;5) Schedule of accommodation of the proposed Community building: DepartmentRoomRemarksPublic areaPublic information counterTesting arrival / waiting areaTest areaMedical areaMedical lab/ preparation roomCollection / storage facilityMust have separateentrance.Staff areaStaff areas with, Pantry, Male toilet(s), Femaletoilet(s)Around 40% of totalfloor areaCirculation areaCorridor, staircaseBuilding ServicesMechanical Room, A/C plant room, etc.Around 10% of totalfloor area 6) At least one male and female toilet for public area; Prefer with one Accessible Toilet on G/F;7) These are the suggested requirements for your design. All other design considerations orvariables are open to your own creativity and imagination. Go for it and mix and match tosuit!8) The site is intended to locate within Hong Kong and students are recommend to specify aparticular site to develop its program;9) These are the suggested requirements for your design. All other design considerations orvariables are open to your own creativity and imagination. Go for it and mix and match tosuit!Suggested design features1) Double height space;2) Cantilever slab / Elevated space;HD in Building Studies CON4152– BIM for Building WorksCON4152-EA-Drawing_project-202021 (new) – Page 2 of 4 – Mar-213) Daylight penetrated interior space.4) Accessible room and toiletTechnical Requirements1) The Level of Development (LOD) requirement:Building frame (i.e. Wall, Slabs, Roof, windows, doors, Staircase. Etc.): LOD 200Furniture and equipment: (i.e. Toilet fixture, etc.): LOD 3002) The complete design of the building should be shown by scaled drawings as much aspossible for measurement (taking-off) purpose. Therefore, there is no need to create toomuch needless 3D views.3) All presentations must be suitable for black-and-white reproduction. Students may usecolor if desired, but must ensure that distinct colors will be readily distinguishable toneswhen reproduced in black-and-white.4) Paper size: A3 sized paper (420 x 297 mm).5) Scale: All drawing must print to a scale that can be found on an ordinary scale ruler(i.e. 1:25, 1:30, 1:40, 1:50, 1:100, 1:150, 1:200).6) Student must develop a common drawing frame / border for all drawings and such drawingframe / border must contains the following information: Drawing title, Scale, Print date,Drawing number – student can develop his own serial number for all drawings, Student’scourse title, course code, year, full name of student, etc.7) All drawings must adopt the system text style, text height, dimensioning, line weight, etc.General submission requirements:1) Hardcopya) All submission must be in A3 sized papers.b) Students should prepare title block with your campus name, course title, course codewith year, Module title, module code, full name, student number and a portrait photo ofthe student, Link and QR code to the Revit file.2) Submissiona) Moodle: Revit File of model with all views and sheets;b) PDF: Complete set of all drawings (Submit to Moodle)c) Link to Revit file shared in A360: https://a360.autodesk.com/ (Submit to Moodle / MSForms)HD in Building Studies CON4152– BIM for Building WorksCON4152-EA-Drawing_project-202021 (new) – Page 3 of 4 – Mar-21EA Submission requirements: ·············································60 % of module total marks1) ·All necessary plans, elevations, sections, schedules and other representation.List of deliverable to be submit for assessment: ·············································100% total i.Title blocks (including: drawing title, scale and drawing number(By Revit Sheet list command) ·····································································5% ii.iii.Drawing list (By Revit Sheet list command) ···················································5%Site Plan (Showing site boundary and it relation to the proposed building, Area Plan(Gross Building); by Revit property lines, Area command) ·························· 10%#Building plans with dimension of each space;i.e. G/F Plan, 1/F Plan, Roof Plan(At least 2 views per sheet and scale should not exceed 1:200) ·····················30%Room Plan with room name and room area schedule with totals(with Level of each room and total area);······················································10%Elevations (North, South, East, West Elevation and in max. 2 sheets);··············10%Sections: Cross section and Longitudinal section showing staircase(s);·············10%Staircase connection detail: Showing Staircase(s) connection to slabs(Create with Callout command). ································································10%iv.v.vi.vii.viii. ix.x.3D views (At least one exterior and one interior view)·····································10%Sharing of the model file to oneline platform (i.e. A360) ······························5%(The mark allocation indicated above is for reference only.For individual drawing, please also refer to evaluation criteria) #This drawing must submit to lecturer’s at least 1 week before the last class as aseparate assignment.2) Optionala) Link to video of Walkthrough;b) Link to video of Solar studyAll file and drawings must be submitted personally by end of last lecture in April / May 2021.Evaluation criteria for individual drawingsThe following points will be considered in assessing the grade of each drawing:1) Modelling techniquea) Completeness of BIM model for building documentation;b) Demonstrate the compliance of minimum design requirements with appropriateschedules.c) Correct use of Cloud-base resource2) Drawing technique / Documentation of buildinga) Appropriate use of scale to display the respective drawings;b) Correct use of building symbol and convention;c) Clarity drawing annotation including dimension, label, text and tags;d) Comprehensibility of drawing: use of appropriate line weight.3) Application of BIM with other applicationsa) Demonstration of compliance with relevant planning regulations and design code withcorresponding dimensions;b) Realities of building design: response to site context, climate condition;c) Use of Walkthrough or VR technique.HD in Building Studies CON4152– BIM for Building WorksCON4152-EA-Drawing_project-202021 (new) – Page 4 of 4 – Mar-21ReferenceDrawings sample1) Sales of First-hand Residential Properties Electronic Platform (“SRPE”):https://www.srpe.gov.hk/opip/default.htmRevit Families1) Family Library Interchange Program (FLIP): http://aiab.org/index.php/files2) CIC BIM Objects: https://www.bim.cic.hk/en/resources/bim_objects3) BIMobject | Download free BIM content from the BIMobject Cloud: https://bimobject.com/en4) Steelcase Revit Models: http://revit.steelcase.com/5) BIM content network for Revit, ArchiCAD, Vectorworks & Sketchup: http://www.modlar.com/6) Coalesse: Furniture & Office Space Design Resources: http://www.coalesse.com/resources/ 7)BIM.ARCHIPRODUCTS | The largest BIM and CAD database for architects and designershttp://bim.archiproducts.com 8) Bimstore Quality Free BIM Content creation and Distribution: https://www.bimstore.co.uk/9) NBS National BIM Library – free-to-use BIM objects: www.nationalbimlibrary.com10) Bimetica | BIM Library: Revit Families, Archicad, 3D Blocks.: www.bimetica.com/en/11) TracePartsOnline.net: https://www.traceparts.com/en12) Arcat find building products, companies, specification: www.arcat.com/13) Archiproducts | Architecture and Design Products: http://www.archiproducts.com/en14) Miele Residential http://www.mielebim.com.au/15) Medical Equipment Revit: https://free3d.com/3d-model/1016-models-for-hospital-equipment-revit-2015-4440.htmlDrawing standard / BIM Standard1) ISO 19650 series Guidance Part 1 and Guidance Parts A-F Organization and digitization of information aboutbuildings and civil engineering works, including building information modelling (BIM). Informationmanagement using building information modelling.2) Construction Industry Council (2020) CIC BIM Standards – General (Version 2 – December 2020)3) https://www.bim.cic.hk/en/resources/publications4) Construction Industry Council (2020) CIC BIM Dictionary (December 2020)5) https://www.bim.cic.hk/en/resources/publications6) Construction Industry Council (2020) CIC BIM Standards for Preparation of Statutory Plan Submissions7) https://www.bim.cic.hk/en/resources/publications8) Construction Industry Council (2020) CIC BIM Standards for Architecture and Structural Engineering (Version2 – December 2020)9) https://www.bim.cic.hk/en/resources/publications10) Construction Industry Council (2020) CIC BIM EIR with Sample Project EIRhttps://www.bim.cic.hk/en/resources/publications11) Building Department (2019) Guidelines for Using Building Information Modelling in General Building PlansSubmission 2019 https://www.bd.gov.hk/doc/en/resources/codes-and-references/code-and-designmanuals/BIMGBPS_e.pdf12) Hong Kong Housing Authority (2018) HABIM Standards and Guidelines Version 2.0https://www.housingauthority.gov.hk/en/business-partnerships/resources/building-information-modelling/Books1) Neufert Architects’ Data;2) Human Dimension & Interior Space: A Source Book of Design Reference Standards;3) Materials, Structures, and Standards: All the Details Architects Need to Know But Can Never Find;4) Color, Space, and Style: All the Details Interior Designers Need to Know but Can Never Find;5) Time-Saver Standards for Interior Design and Space Planning.Codes of Practice / Design Manuals1) Code of Practice for Fire Safety in Buildings 2011 (October 2015 version)https://www.bd.gov.hk/doc/en/about-us/fs_code2011.pdf 2)Design Manual – Barrier Free Access 2008 with Oct 2020 Amendmentshttps://www.bd.gov.hk/doc/en/resources/codes-and-references/code-and-design-manuals/BFA2008_e.pdf Free one-year educational access to Autodesk products and services1) https://www.autodesk.com/education/edu-software/overview/