-
What are some of the main challenges of the Web poses for kn
Wridemy Plagiarism Free Paper Writing Website. Visit us here Wridemy What are some of the main challenges of the Web poses for knowledge discovery?Further to the above and because of its sheer size and complexity, mining the Web is not an easy undertaking by any means. The Web also poses great challenges for effective and…
-
IntroductionBecause police interrogation of a suspect has th
Wridemy Plagiarism Free Paper Writing Website. Visit us here Wridemy IntroductionBecause police interrogation of a suspect has the potential for compulsory self-incrimination, it is subject to limitations imposed by the Fifth Amendment. Determining what constitutes an interrogation and whether the individual was in custody are key inquiries that impact procedural parameters.Let’s put this into action.…
-
Design a vertical turbine flocculator to treat 75,700 m3/d of water per day at a detention time of 30 minutes.
Design a vertical turbine flocculator to treat 75,700 m3/d of water per day at a detention time of 30 minutes. Use three parallel treatment trains with four compartments per train. The temperature of the water is 20∘C, resulting in values of 1.002 × 10−3 kg/(m⋅s) and 998.2 kg/m3 for and ρ, respectively. The impeller diameter…
-
Design an RO WTP to meet the following criteria.
Design an RO WTP to meet the following criteria. Influent feed TDS = 3000 mg/L. Finished water produced flow rate = 1.5 MGD. TDS in treated water = 300 mg/L. Temperature of the feed = 20∘C. Water recovery factor (r) = 90% and the salt rejection = 95%. Design pressure = 600 psi and water…
-
Determine the specific gravity (S s) of the dry solids in the slurry.
The water content of a solids slurry is reduced from 99% to 96% by gravity thickening. Assume that the dry solids contain 20% organic matter with a specific gravity of 1.0 and 80% inorganic or mineral matter with a specific gravity of 2.0. Lime sludge thickens to 5.0% solids in a gravity thickener. Assume that…
-
Determine thediameter (ft) of the gravity thickener considering both the solids loading rate and overflow rate.
A lime softening sludge flow of 30,000 gpd is gravity thickened from 2.0% to 5.0% in a mechanical gravity thickener. The gravity thickener is to be designed using a solids loading rate of 10 lb/(ft2⋅d) and a solids capture of 85%. Assume that the thickener has a side water depth (SWD) of 10 ft, an…
-
Determine Effluent soluble BOD5 (SBOD5) concentration in mg/L necessary to meet the effluent total BOD5 (TBOD5) requirement of 20 mg/L.
A complete-mix activated sludge process (CMAS) is to be designed to treat 5.0 million gallons per day (MGD) of primary effluent having a BOD5 of 180 mg/L. The NPDES permit requires that the effluent BOD5 and TSS concentrations should be 20 mg/L or less on an annual average basis. The following biokinetic coefficients obtained at…
-
Each answer must be in a paragraph format of at least 75 wor
Wridemy Plagiarism Free Paper Writing Website. Visit us here Wridemy Each answer must be in a paragraph format of at least 75 words or more. 1. Describe some ways that psychologists provide services to jail inmates. 2. Discuss the benefits of Multisystemic Therapy (MST) in the treatment of juvenile offenders. 3. .Suppose you are the…
-
Determine Volume of the aeration basin (m3) at an SRT = 30 days.
Given the following information for an oxidation ditch activated sludge process: Q = 11,400 m3/d, influent soluble BOD5 = 250 mg/L, Y = 0.6 g VSS/g BOD5, kd = 0.06d−1, KS = 70 mg/L BOD5, k = 6 d−1, MLVSS = 0.70 MLSS, TKN0 = 40 mg/L, MLSS = 3,500 mg/L, DO = 2 mg/L.…
-
Design a fine-bubble diffused aeration system to meet an oxygen demand of 5,000 kg/d.
Design a fine-bubble diffused aeration system to meet an oxygen demand of 5,000 kg/d. The plant is located at an elevation of 610 meters (2,000 ft). There are two aeration basins with a total volume equal to 5,400 m3. Assume the alpha and beta coefficients for the diffusers are 0.35 and 0.95, respectively and use…