6c. Setup a secondary DHCP server connected to SW.Add a server to the topology. The name will not matter but it will probably be Server0.Connect Server0 to SW Gi0/2.On SW: Configure interface Gi0/2 as an access port in vlan20 and activate the port.On Server0: Assign the .2 ip address from your vlan20 network.On Server0: Configure … Continue reading “secondary DHCP server | My Assignment Tutor”
6c. Setup a secondary DHCP server connected to SW.Add a server to the topology. The name will not matter but it will probably be Server0.Connect Server0 to SW Gi0/2.On SW: Configure interface Gi0/2 as an access port in vlan20 and activate the port.On Server0: Assign the .2 ip address from your vlan20 network.On Server0: Configure the DHCP server under the Services Tab:1. Turn DHCP services on2. Set the Default Gateway (using the same value as the pool on MLS).3. Set the DNS Server (199.9.9.9)4. Set the Start IP Address as the .10 address in the vlan20 network.5. Set the maximum number of hosts to 15.6. Select Save to save the updated serverPool.6d. After configuration of DHCP snooping, test that DHCP via the secondary server is working.
