CET1000 Network Design for Skills Specifics This work is submitted individually (not group work). Note: Topologies that are deemed too similar will receive a grade of 0. Must be completed in PT 8.2. You must start with the TopologyDesignTempl

CET1000 Network Design for Skills

Specifics

• This work is submitted individually (not group work).
  • Note: Topologies that are deemed too similar will receive a grade of 0.
• Must be completed in PT 8.2.
• You must start with the TopologyDesignTemplate2023.pkt
• Milestone due dates – This is what I want
  • Finalized Topology – Sunday April 9^th, 2023, 11:59 PM. Uploaded as image and PKT file for marking. The PKT file will be your skills exam network.
    • Must include all addressing as well as basic connectivity. All directly connected devices must be able to communicate. Do not configure any routing protocols or other settings.
    • I must approve all topologies. If you fail to submit, you will not only lose lab marks, but you will not have a topology to complete your skills exam with and you will have to design it as part of your exam time.

Topology Objective –

• To design a network topology that meets the specified requirements and addresses the IPaddressing requirements.
• Instructions:

1. Design a network topology that includes at least three sites interconnected by ISP router(s). Each site should include an edge router, switches, and at least two routed VLANs.
2. Assign non-overlapping IPv4 private addressing to all LAN networks using /24 subnets. Ensure that hosts are assigned addresses from their respected VLANs.
3. Assign Public IPv4 addressing to all WAN networks. Ensure that all point-to-point links use /30 subnets.
4. Ensure that each VLAN has at least two hosts.
5. Name all devices using a theme of your choice. Do not use R1, R2, ISP Router…

Marking Rubric:

• The following marking rubric will be used to evaluate your network topology design:

1. Network Topology (20 marks)
   • The network topology includes at least three sites interconnected by ISP router(s) (4 marks)
   • Each site includes an edge router, switches, and at least two routed VLANs (10 marks)
   • Each VLAN has at least two hosts (6 marks)
2. IP Addressing Requirements (15 marks)
   • Non-overlapping IPv4 private addressing is assigned to all LAN networks using /24 subnets (5 marks)
   • Public IPv4 addressing is assigned to all WAN networks (5 marks)
   • All point-to-point links use /30 subnets (5 marks)
3. Name All Devices (10 marks)
   • Pick a theme to use and name all your devices (10 marks)
     1. You can use City names as well as a fake or real ISP name.
     2. You can use your favorite movie/tv show or family names.
     3. Be creative here!
     4. Do not use R1, R2, ISP, PC1 etc..